Hardness Specimen Cutting Device Hardness Specimen Cutting Device

QC-603I Hardness Specimen Cutting Device

Send us an Inquiry

Description

This machine is suitable for hardness flat shape of polymer material, as a fixed sample or specimen trimming purposes. It needs to base on forming of appearance to make mold and take slightly larger than finished product of material clamp on the mold. The mold will be slow put into machine and cut out redundant of shape which is sample.
QC-603I with precise track and mold that can reduce vibration and danger during operation. It also can base on material of properties to set up fast and low speed to doing cut. The customer can choose different mold to replacement with multipurpose purpose.

Testing Video


Specifications


Material

Hardness of polymer specimen

Horse power

600W

Cutting speed

99 sector speed change

Speed ragne

150~3500 rpm

Specimen thickness

2 ~ 15 mm

Capacity for mold

Length: 25-280mm Width: 20-70mm Height: 30mm

Minimum cutting R angle

R=6 mm

Accessories

1. With one dumbbell shape cutter, customized shape is also acceptable but cannot be wider than 100mm and longer than 250mm.
2. With transparent protection cover.
3. With vacuum function to assemble scrap keep it clean when operating.(vacuum machine not included)
4. Equipped with track to increase the stability, safety and fluency.

Power

Single phase, 110V or 220V(Designate)

Dimension

47 × 40 × 45 cm (W x D x H)

Weight

60 kg

Accessories

Dumbbell-type mould

A dumbbell-type mould is attached to the product. If other grips are required, the size and shape can be specified.
(length limitation: 250 mm, width limitation: 100 mm)

Related Machines


Related Services