D1控制器

D2 Controller

Send us an Inquiry

Description

D2 controller is basically designed for material testing, which can analyze load cell, torque sensors, pressure sensors, encoder and so many varieties of signals.
Every kind of units can be changed according to user’s demand when using it.
It will display the real time value and the short timing data.
it will has a real-time display or record the short time data. Data can be restored and exported to EXCEL sheet for further analysis by USB. Or the specified software can also be an option for proceeding with further analysis. When customer has a special requirement, it also could be modified and designed based on their needs.

Catalog Download

D1控制器

Specifications


Power force(DC)

6V

Control signal input

1.Two sets of input signal for selection:
Stress sensor: 4~20mA
Force sensor: 1.0mV/V、1.5 mV/V、2.0mV/V、3 mV/V、4 mV/V
2. Two sets of Encoder signal input
3. Input signal: upper limit, lower limit, emergency stop, go up, go down, full speed.

Control signal output

One set of breakpoint output signal

Communication Interface

TCP/IP RJ45 Connecting Cable

Load cell Revolution

1/10,000

Encoder signal voltage

5V

Encoder signal mode

Single- ended (Open Collector)、differential square wave(Line Driver)

Display panel

7 inche of TFT Color touch panel

Language selection

Chinese, English, Japanese

Data assess

1. Can use USB to proceed with data access (can export test data to Excel for further data analysis)
2. Specified software is optional for data access

Data sampling rate

2、5、10、25、50、100、400Hz

Interface function

1. Data Display: Force , Stress, Torque, Displacement, Time
2. Graph Display : Force, Displacement, Time
3.Date Analysis : maximum force, deformation percentage at maximum force point, stress at maximum force point, percentage of elongation at maximum force point, force at break point, deformation percentage at break point, stress at break point, percentage of Elongation at specified break point, interval average load, Max. Force…..so on.
4. Unit changeable (Metric system or imperial system)

Calibration setting

1. Calibrated parameter setting can be provided
2. Can be used on various capacity of load cell and no need to re-calibration after replacement.