: : : Product Search : : : ˇ@


ˇn According to Functions ˇnTensile/ Compression Teste


The table type has large test space and long stroke. Multiple model of width can satisfy large specimen test requirement. The maximum test capacity is 20 kN with high precision, low noise and maintenance-free of servo drive system. Maintenance-free transmission mechanism to reduce machine maintenance problems and in the same time it provides a quiet test environment and high-precision test results Support precision jog wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy. High-speed signal feedback mechanism can reduce the chance of machine overload. The reserved external signal can be connected to an external signal source, increasing machine control mode.
  No Related Products

  No Accecsories

  No Documents

 Specs ˇ@  Description
 Max. Capacity ˇ@  20kN
 Units ˇ@  Force: gf, kgf, lbf, N, kN, ozf, tonf(SI),
 ton(long), tonf(short)
 Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
 Force Resolution ˇ@  31 bits
 Force Precision ˇ@  1/100,000
 Test stroke(w/o grip) ˇ@  800mm
 Stroke resolution ˇ@  0.0001mm
 Space between columns ˇ@  425 mm (550mm, 680mm, 800mm optional)
 Speed range ˇ@  0.0002 ~ 830 mm/min adjustableˇ]Set up by
 Speed accuracy ˇ@  High speed mode
 0.05 ~ 830 mm/min
 Low speed mode
 0.0002~3 mm/min
 PC-Port ˇ@  RJ45(TCP/IP)(Connect software optional)
 Data sampling rate ˇ@  1200Hz (Max.)
 Hardware safety protection ˇ@  upper limit, lower limit, emergency stop button
 Motor type ˇ@  Servo Motor
 Stiffness Slop ˇ@  1585 kgf/mm
 Power Supply ˇ@  Single phase 200V -240 V, 5A
 Dimension of Machine ˇ@  95 x 58 x 151 cm
 Weight of Machine ˇ@  145kgf
 Force Resolution ˇ@  31 bits
 Force Precision ˇ@  1/100,000


Home | About | Products | Contacts us | FAQ | Downloads
2004© Cometech Testing Machines Co., Ltd.
No.49, Ln. 39, Liancun Rd., Fengyuan Dist., Taichung City 42082, Taiwan
TEL:886-4-25368881 FAX:886-4-25368883
http://www.come-tech.com.tw eMail:sales@come-tech.com.tw , dahchang@ms25.hinet.net